Перейти до публікації
×
×
  • Створити...

Новые втулки Rockman Slot


Saviola
 Поділитись

Рекомендовані повідомлення

Передняя Rockman Slot Disc 28H

Rockman_Slot_Disco_28H_01.jpg Rockman_Slot_Disco_28H_02.jpgRockman_Slot_Disco_28H_03.jpg

Спойлер

Description and materials
- New Rockman Slot disc front hub, manufactured by renowned bike trials brand Rockman.
- Completely exclusive design by Rockman, featuring slots in the hub shell. These slots have round edges to prevent cracks, as seen with other hubs.
- This, along with the recesses around the spoke holes and rotor mounts, helps save a lot of weight without compromising strength.
- Both the axle and shell are CNC machined from high quality 7075-T6 aluminium alloy, which ensures extraordinary mechanical properties.
- Uses a hollow axle with M6 internal thread and 100mm spacing, therefore it’s compatible with most forks available.
- 28 spoke holes, compatible with most front rims designed for bike trials.
- High quality replaceable sealed bearings ensure a smooth, reliable, durable running.
- Standard IS 6-bolt disc rotor fitting.
- Includes M6x20mm steel bolts and serrated tapered aluminium washers.

Compatibility
- Compatible with those forks that have 100mm spacing between the dropouts.
- Compatible with rims that have 28 spoke holes.
- Compatible with those disc brake rotors with standard IS 6-bolt fitting.

Dimensions
- Axle length: 100mm
- Axle diameter: 9mm
- Number of spoke holes: 28 (28H)
- M6x20mm Allen bolts

Finishes
- Gloss black hub shell, with white laser etched Rockman graphics, and anodized orange axle, spacers and washers.

Weight
- 125,74g!! (+17,29g of bolts and washers)

 

Задняя втулка Rockman Slot Disc 32H 116мм

Rockman_Slot_Disco_32H_116mm_01.jpgRockman_Slot_Disco_32H_116mm_02.jpgRockman_Slot_Disco_32H_116mm_03.jpg

Спойлер

Description and materials
- New Rockman Slot disc rear hub, manufactured by renowned bike trials brand Rockman.
- Completely exclusive design by Rockman, featuring slots in the hub shell. These slots have round edges to prevent cracks, as seen with other hubs.
- This, along with the recesses around the spoke holes and rotor mounts, helps save a lot of weight without compromising strength.
- Both the axle and shell are CNC machined from high quality 7075-T6 aluminium alloy, which ensures extraordinary mechanical properties.
- Uses a hollow axle with M6 internal thread and 116mm spacing, therefore it’s compatible with most frames available.
- 13mm threaded base for the freewheel/sprocket, with standard 1,37”x24 tpi thread that is compatible with most freewheel and sprockets.
- 32 spoke holes, compatible with most rear rims designed for bike trials.
- High quality replaceable sealed bearings ensure a smooth, reliable, durable running.
- Standard IS 6-bolt disc rotor fitting.
- Includes M6x20mm steel bolts and serrated tapered aluminium washers.

Compatibility
- Compatible with those frames that have 116mm spacing between the inner side of the dropouts.
- Compatible with rims that have 32 spoke holes.
- Compatible with those disc brake rotors with standard IS 6-bolt fitting.
- Only compatible with freewheels/sprockets with standard 1,37”x24 tpi thread.

Dimensions
- Axle length: 116mm
- Axle diameter: 10mm
- Number of spoke holes: 32 (32H)
- M6x20mm Allen bolts

Finishes
- Gloss black hub shell, with white laser etched Rockman graphics, and anodized orange axle, spacers and washers.

Weight
- 148,84g!! (+17,29g of bolts and washers)

 

  • +1 2
Посилання на коментар
Поділитися на інших сайтах

Во! Наконец то пошли в массы эти пропилы по центру корпуса!! А то все сами напильниками!!!

  • +1 2
Посилання на коментар
Поділитися на інших сайтах

Щось не проперли.... на ринку є і прикольніші рішення

Посилання на коментар
Поділитися на інших сайтах

отличный грязесборник..

  • +1 2
Посилання на коментар
Поділитися на інших сайтах

А на шлицах сейчас делают задние втулки, а то я не в теме

Посилання на коментар
Поділитися на інших сайтах

6 часов назад, Can сказал:

А на шлицах сейчас делают задние втулки, а то я не в теме

Немногие, но делают. Например, Bonz выпустил в этом году втулки «Power-H» под шлицевые звезды.

Задняя втулка Bonz «Power-H» Disc (116 мм)

Задняя втулка Bonz «Power-H» (135 мм)

Посилання на коментар
Поділитися на інших сайтах

Створіть акаунт або увійдіть у нього для коментування

Ви маєте бути користувачем, щоб залишити коментар

Створити акаунт

Зареєструйтеся для отримання акаунта. Це просто!

Зареєструвати акаунт

Увійти

Вже зареєстровані? Увійдіть тут.

Увійти зараз
 Поділитись

Общий чат

Общий чат

Please enter your display name